How do I use Ploom X Advanced?

If it's your first time using Ploom X Advanced and Mevius tobacco sticks, we've made it easy for you.

Here's how to use Ploom X Advanced:

1. Slide the cover open and wait for the LED light to turn off.

2. After the LED light turns off, push the stick in up to the line, making sure that the printed line is aligned with the top of the device. The ventilation holes should be invisible.

3. The device is set to AUTO ON. One flash of LED and one long vibration indicate that the device is heating.

4. When your Ploom X Advanced is ready to go, the LED strip will be fully lit, and you'll feel two short vibrations.

In case heating does not start automatically, or if you have deactivated AUTO ON, the device can be started manually by holding down the button area below the LED strip.

When you've got 20 seconds left, Ploom X Advanced will vibrate and the LED strip will pulse slowly. Once you feel one long vibration, your session is finished.

Here's a bit more about how to use Ploom X Advanced.